Installed sanctuary systems
500 Seat Church Sound System
Quick answer
A complete 500 seat church sound system costs about $32,838 in equipment. It runs four 2,000 watt mains and two 18 inch subwoofers, a 48 channel console with a 32 channel stage box, six wireless channels and personal in-ear mixing for a full band.
A 500 seat sanctuary is around 3,750 square feet with an 80 foot throw, and at that distance a point-source system starts running out of ability to keep the front and back rows within a few decibels of each other. This build is the largest honest point-source system: past about 700 seats, the right answer becomes a line array and a design engagement rather than a shopping list.
Two things change at this size that are easy to miss. The console needs to hold the whole input list without paging, and the subwoofers need to be cardioid, so the low end goes into the room and not onto the platform and into the open microphones.
The complete build: $32,838
Loudspeakers
Four boxes, and both subwoofers in cardioid. Anything flown here needs attachment points specified by a structural engineer or a certified rigger, using rated hardware, never conduit or a decorative beam.
| Item | Why this one | Qty | Price | Buy |
|---|---|---|---|---|
 JBL Professional PRX912 Next-Generation 12-Inch Powered Portable 2-Way Loudspeaker with DSP, 12-band parametric EQ, and Built-in Effects | A 2,000 watt class D cabinet with a full DSP suite and real fly points, built to be installed and left alone rather than moved weekly. | 4 | $3,996.00 | Price |
 QSC KS118 Active 18" Subwoofer | An 18 inch cardioid-capable subwoofer reaching into the low thirties. The cardioid mode is the point: it keeps low end off the platform and out of the open microphones. | 2 | $4,399.98 | Price |
 QSC K8.2 Active 8" Powered 2000 Watt Loudspeaker | Front fills for the first two rows, which sit under the coverage of the flown mains and otherwise hear almost nothing direct. | 2 | $1,499.98 | Price |
 JBL Professional Control 25-1 Compact Indoor/Outdoor Background/Foreground Speaker, Black, Sold as Pair | A pair of surface-mount fills for the under-balcony or side aisle seats, delayed to the mains so they disappear. | 1 | $457.98 | Price |
| Loudspeakers subtotal | $10,353.94 | |||
Console, processing and stage box
| Item | Why this one | Qty | Price | Buy |
|---|---|---|---|---|
 Allen & Heath SQ-5 Digital Mixer, 48 Input Channels, 7" Capacitive Touchscreen, Automatic Mic Mixing, 32×32 USB Audio Interface | Forty-eight input channels and 36 buses at 96 kHz, with an automatic microphone mixer that handles a rota of readers without a volunteer riding faders. | 1 | $3,999.00 | Price |
 Behringer S32 32-Channel Stage Box | Thirty-two preamps and sixteen outputs on the platform, so the whole input list and every monitor send originate where they belong. | 1 | $669.99 | Price |
 Behringer Ultradrive Pro Dcx2496 Ultra High-Precision Digital 24-Bit/96 Khz Loudspeaker Management System | A three in, six out loudspeaker manager with delay on every output, which is what time-aligns the fills and the under-balcony speakers to the mains. | 1 | $339.00 | Price |
 Cable Matters 10Gbps Snagless Shielded Cat 6A Ethernet Cable, 100ft | Shielded Cat 6A for the stage box run and the control network, kept clear of mains wiring. | 3 | $89.97 | Price |
 Radial Pro DI Passive Direct Box | Passive direct boxes for acoustic instruments and bass. | 3 | $404.97 | Price |
 Radial ProD2 Passive 2 Channel Direct Box | Stereo direct boxes for keyboards and playback. | 2 | $419.98 | Price |
| Console, processing and stage box subtotal | $5,922.91 | |||
Wireless microphones
Six channels in digital, not analog. Digital fits roughly twice as many compatible channels into the same shrinking spectrum, and at six channels that starts to matter.
| Item | Why this one | Qty | Price | Buy |
|---|---|---|---|---|
 Shure SLXD24D/SM58 Dual Wireless Vocal System - H55 Band | Two digital channels in one rack unit with the receivers coordinating their own frequencies, which is what makes a dense system physically and practically possible. | 1 | $1,649.00 | Price |
 Shure SLXD24/SM58 Digital Wireless Microphone System - Includes SLXD2 Handheld Transmitter with SM58 Vocal Mic Capsule and SLXD4 Single Channel Rack Mount Receiver | A third digital handheld channel on the same platform, so the whole system coordinates together. | 1 | $769.00 | Price |
 Sennheiser EW-D ME3 Dynamic Headset SET (R1-6) | A digital headworn system with a cardioid capsule, the most feedback-resistant thing a preacher can wear in a large live room. | 1 | $669.86 | Price |
 Shure BLX188/CVL Dual Wireless Lavalier System - H9 Band | Two lapel channels in one dual receiver for guest speakers and drama, which halves the rack space and the outlets. | 1 | $689.00 | Price |
| Wireless microphones subtotal | $3,776.86 | |||
Wired microphones and stands
Monitoring
| Item | Why this one | Qty | Price | Buy |
|---|---|---|---|---|
 Behringer Powerplay P16-HQ 16-Channel Digital Personal Monitoring Mixer | Eight personal mix positions with the improved headphone amplifier, fed over one cable from the stage box. | 8 | $1,631.92 | Price |
 Behringer POWERPLAY P16-D 16 Channel Digital ULTRANET Distributor | The distribution hub that splits and powers the whole personal mixer system. | 1 | $139.00 | Price |
 Shure SE215 PRO Wired Earbuds - Professional Sound Isolating Earphones, Clear Sound & Deep Bass, Single Dynamic MicroDriver, Secure Fit In Ear Monitor, plus Carrying Case & Fit Kit - Clear (SE215-CL) | Isolating earphones for every position, which is what lets the platform actually get quieter. | 8 | $952.00 | Price |
 Shure PSM300 P3TRA215CL Pro Wireless in-Ear Personal Monitoring System with SE215-CL Earphones | One wireless in-ear channel for the worship leader, who is the one person who genuinely cannot be tethered. | 1 | $989.00 | Price |
 Sennheiser HD 280 Pro Headphone | Closed-back headphones at the mix position and the broadcast position. | 2 | $170.98 | Price |
| Monitoring subtotal | $3,882.90 | |||
Rack, power and stream feed
| Item | Why this one | Qty | Price | Buy |
|---|---|---|---|---|
 Gator Cases Pro Series 12U Rack Case, Standard 19" Depth (G-PRO-12U-19) | Two racks: one at the mix position and one at the amplifier and processing end, with spare units in both. | 2 | $659.98 | Price |
 Furman PL-8C Classic 15A Power Conditioner, 9 Outlets & LED Rack Lights | Filtered power with rack lights at the top of each rack. | 2 | $509.94 | Price |
 Furman Power Conditioner, Black (M-8S) | A power sequencer that brings the rack up in order and shuts the amplifiers down first, which is what stops the thump through the speakers at the end of a service. | 1 | $415.95 | Price |
 Focusrite Scarlett 18i16 4th Gen USB-C Audio Interface | Eighteen inputs, so the service records in multitrack and the stream audio can be remixed afterwards rather than being whatever went out. | 1 | $569.99 | Price |
 Pig Hog PHM50 Series 50' XLR Microphone Cables 2-Pack | Heavy-jacket cable for the positions that move every week. | 6 | $323.94 | Price |
 Amazon Basics XLR Microphone Cable for Speaker or PA System, Recording Studio, All Copper Conductors, 6MM PVC Jacket, 50 Foot | Fixed runs and spares. | 6 | $118.38 | Price |
| Rack, power and stream feed subtotal | $2,598.18 | |||
Accessibility
| Item | Why this one | Qty | Price | Buy |
|---|---|---|---|---|
 Listen Technologies LP-4VP-072 Assistive Listening DSP Value Package, Includes LT-803-072 Stationary 3-Channel RF Transmitter, 72 MHz | A stationary transmitter with DSP receivers on the 72 MHz band, which is reserved for assistive listening and therefore far cleaner than an unlicensed band. | 1 | $1,154.00 | Price |
 Listen Technologies LR-4200-072 Intelligent DSP RF Receiver 72 MHz, Integrated Neck Loop Lanyard, OLED Display, Dual 3.5mm Outputs, Micro USB Charging, T-Coil Compatible Assistive Listening | Additional receivers with the neck loop built in. This is how you meet the ADA count: buy a base system, then add receivers until the number matches the seats. | 8 | $786.24 | Price |
 Listen Technologies LA-430 Intelligent Ear Phone/Neck Loop Lanyard, Black, Compatible with All iDSP Receivers, 3.5mm Earphone Jack, Provides the Correct Field Strength and Flat Frequency Respon | Neck loops that feed a hearing aid on its telecoil setting. At least a quarter of receivers must be hearing-aid compatible. | 4 | $284.00 | Price |
| Accessibility subtotal | $2,224.24 | |||
Equipment only. At this size the installation is a project in its own right: flying four mains and two subwoofers, structural sign-off on every attachment point, conduit, three dedicated circuits and a professional room tuning. Budget 40 to 60 percent on top of this figure, and engage an integrator before ordering anything.
- Room size
- About 3,750 sq ft
- Throw to back row
- About 80 ft
- Power per speaker
- About 1,600 W needed
- Console channels used
- 38 of 48
- Wireless channels
- 6 digital
- Monitor mixes
- 8 personal plus 1 wireless
- ADA receivers
- 20, five hearing-aid compatible
- Circuits needed
- 3 dedicated 20 A
Prices were accurate when this list was compiled and change often, so confirm each one before the committee votes. Quantities are multiplied into the total. This total covers equipment only: it does not include installation labor, rigging, conduit, electrical work or permits, which on an installed system commonly add 30 to 60 percent.
Why this is the largest point-source system worth building
A point-source loudspeaker loses 6 dB every time the distance doubles. In an 80 foot room, the seat at 20 feet and the seat at 80 feet are 12 dB apart from the same box, which means the front rows are being shouted at whenever the back row can hear. Aiming and multiple boxes reduce that spread but cannot remove it.
A line array behaves differently: near the array the level falls at roughly 3 dB per doubling rather than 6, so front and back stay far closer together. That is the whole reason large rooms use them. Past about 700 seats, or in any room deeper than about 100 feet, the honest recommendation is a line array specified by an integrator with prediction software, not a bigger version of this list. See line array against point source.
What a 500 seat room needs that a 250 seat room does not
Doubling from 250 to 500 seats roughly doubles the equipment cost, but the changes that matter are cardioid subwoofers, delayed fills and digital wireless, not simply more of everything.
| Element | 250 seats | 500 seats | Why it changes |
|---|---|---|---|
| Main loudspeakers | 3 boxes on stands | 4 flown boxes plus front fills | The front rows fall under the coverage of a flown system |
| Subwoofers | 1 compact 12 inch | 2 cardioid 18 inch | Cardioid keeps low end off the platform and out of open microphones |
| Console | 32 channels | 48 channels at 96 kHz | The input list no longer fits, and latency starts to matter with in-ears |
| Wireless | 4 analog channels | 6 digital channels | Digital fits roughly twice as many channels in the same spectrum |
| Processing | Console only | Dedicated loudspeaker manager | Delayed fills have to be time-aligned to the mains |
| Monitoring | 5 personal mixers | 8 personal plus 1 wireless | A larger band, and a worship leader who cannot be tethered |
| ADA receivers | 10 | 20 | The 2010 ADA table steps up at 500 seats |
| Installation | Stands and brackets | Rigging with structural sign-off | Anything overhead becomes a life-safety question |
What you can skip
Skip the wireless in-ear channels for the band. One for the worship leader is right; eight is not. Each one competes with your six wireless microphones for the same shrinking spectrum. The wired personal mixers in this build do the same job for less money, with no coordination and no batteries.
Skip the outboard channel strips. The SQ-5 has compression, gating and parametric EQ on all 48 channels.
Skip the 4K cameras if video is on the same purchase order. Audio in a 500 seat room is the harder problem and the one people notice. Do the sound properly, then build the video system as its own project.
What to upgrade first
A professional acoustic measurement, before the order goes in. At 3,750 square feet with a high ceiling the room holds a lot of air, and reverberation is the one problem that no loudspeaker fixes. A measurement costs a fraction of this build and will change what you buy. Start with the acoustic treatment calculator to see whether the room is likely to be a problem at all.
Then delay speakers, if the room is deep. An 80 foot throw means the back rows hear the platform about 70 milliseconds late, and under a balcony they may hear almost nothing direct. Delayed fills, timed with the delay timing calculator, do more for intelligibility at the back than another main ever will.
Frequently asked questions
How much does a sound system for a 500 seat church cost?
About $32,838 for the equipment on this list. Installation at this size is a project rather than an afternoon: rigging, structural sign-off on every attachment point, conduit, three dedicated circuits and a professional room tuning commonly add 40 to 60 percent on top, so budget for the whole project rather than the equipment total.
Do we need a line array for a 500 seat church?
Usually not. A well-aimed point-source system with front fills and delayed under-balcony speakers covers 500 seats properly, and this build is that system. A line array becomes the honest answer past roughly 700 seats, or in any room deeper than about 100 feet, where a point source cannot keep the front and back rows within a reasonable level of each other.
What are cardioid subwoofers and do we need them?
A cardioid subwoofer array uses multiple drivers with deliberate delay and polarity so low frequency energy cancels behind the array and reinforces in front of it. In a church that means less low end on the platform, which means less rumble in the open microphones, a clearer vocal and a happier worship team. In a room this size with a band, it is worth the difference.
How many wireless channels can we run at 500 seats?
The seat count does not decide it. What decides it is how many 6 MHz TV channels are empty at your address. Digital systems fit roughly eight compatible channels per empty TV channel against about four for analog, which is why this build is digital throughout. Six channels is achievable almost anywhere; twelve needs a scan and real coordination.
Should the sound and video systems be bought together?
They should be planned together and bought separately. Planning together means the camera positions, the screen position and the loudspeaker positions do not fight each other, which is a real and expensive problem to fix afterwards. Buying separately means the audio, which is the harder problem and the one a congregation notices first, does not get squeezed by a camera line item.
Researched, not professional advice. This page is compiled from published manufacturer specifications, operator manuals, FCC rules, published standards and owner-review consensus, not hands-on testing. Sound system design, rigging loudspeakers overhead, and any electrical work are jobs for a qualified professional: have flown loudspeakers and their attachment points signed off by a structural engineer or a certified rigger, and have all wiring done by a licensed electrician to your local code. Wireless microphone rules change, so confirm the current FCC position before buying. As an Amazon Associate we earn from qualifying purchases.